Cross reference
AS568-111 O-Ring Cross Reference
Nominal AS568 dimensions compared with the closest entries in the currently verified JIS B 2401 P and ISO 3601-1 datasets.
AS568 ID10.770 mm
Cross-section2.620 mm
AS568 OD16.000 mm
Closest dimensional entries
| Standard | Size | ID | CS | OD | ID Δ | CS Δ |
|---|---|---|---|---|---|---|
| JIS B 2401 | P-11 | 10.80 | 2.40 | 15.60 | 0.03 | 0.22 |
| JIS B 2401 | P-11.2 | 11.00 | 2.40 | 15.80 | 0.23 | 0.22 |
| ISO 3601-1 | ISO 013 | 10.82 | 1.78 | 14.38 | 0.05 | 0.84 |
| JIS B 2401 | P-12 | 11.80 | 2.40 | 16.60 | 1.03 | 0.22 |
| JIS B 2401 | P-10A | 9.80 | 2.40 | 14.60 | 0.97 | 0.22 |
| JIS B 2401 | P-10 | 9.80 | 1.90 | 13.60 | 0.97 | 0.72 |
| JIS B 2401 | P-12.5 | 12.30 | 2.40 | 17.10 | 1.53 | 0.22 |
| ISO 3601-1 | ISO 014 | 12.42 | 1.78 | 15.98 | 1.65 | 0.84 |
| JIS B 2401 | P-13 | 12.80 | 2.40 | 17.60 | 2.03 | 0.22 |
| JIS B 2401 | PM-9 | 8.80 | 2.40 | 13.60 | 1.97 | 0.22 |
These are dimensional comparisons, not automatic standards equivalence or interchangeability recommendations.
Check your groove
Use the AS568 size with the Groove Design Check to review your actual groove dimensions.
Groove Design Check