Cross reference
AS568-031 O-Ring Cross Reference
Nominal AS568 dimensions compared with the closest entries in the currently verified JIS B 2401 P and ISO 3601-1 datasets.
AS568 ID44.170 mm
Cross-section1.780 mm
AS568 OD47.730 mm
Closest dimensional entries
| Standard | Size | ID | CS | OD | ID Δ | CS Δ |
|---|---|---|---|---|---|---|
| JIS B 2401 | P-44 | 43.70 | 3.50 | 50.70 | 0.47 | 1.72 |
| JIS B 2401 | P-45 | 44.70 | 3.50 | 51.70 | 0.53 | 1.72 |
| JIS B 2401 | P-43 | 42.70 | 3.50 | 49.70 | 1.47 | 1.72 |
| JIS B 2401 | P-46 | 45.70 | 3.50 | 52.70 | 1.53 | 1.72 |
| JIS B 2401 | P-42 | 41.70 | 3.50 | 48.70 | 2.47 | 1.72 |
| JIS B 2401 | P-41 | 40.70 | 3.50 | 47.70 | 3.47 | 1.72 |
| JIS B 2401 | P-47 | 46.70 | 3.50 | 53.70 | 2.53 | 1.72 |
| JIS B 2401 | P-40 | 39.70 | 3.50 | 46.70 | 4.47 | 1.72 |
| JIS B 2401 | P-48 | 47.70 | 3.50 | 54.70 | 3.53 | 1.72 |
| JIS B 2401 | P-39 | 38.70 | 3.50 | 45.70 | 5.47 | 1.72 |
These are dimensional comparisons, not automatic standards equivalence or interchangeability recommendations.
Check your groove
Use the AS568 size with the Groove Design Check to review your actual groove dimensions.
Groove Design Check